Do you know what types of environmental testing chambers are?

Environmental testing type

Environmental chamber testing usually uses a single-factor test and multi-factor combination test, which act on the products in a certain order.

To improve the accuracy and reliability of the test results, environmental tests have also begun to develop comprehensive tests, and actively develop large-scale multi-functional environmental test equipment that can simultaneously apply stress such as temperature, humidity, vibration, radiation, sand, wind, and rain.

The main types of environmental testing chambers :

  1. Climate environmental testing chambers

Applicable standards are GB2423, GJB150A, GJB4, IEC60068, GJB1032, GJB322A, GJB360A, GJB548, GB4208, GJB899, TB3021, etc.

 

  • Temperature test chamber

High-temperature test chamber, low-temperature test chamber, temperature impact test chamber, temperature change testing chamber, rapid temperature change testing chamber (temperature change rate up to 15 degrees/min), high temperature aging testing chamber, temperature cycle testing chamber, benchtop temperature chambers, etc.

 

  • Humidity (humid)test chamber

Constant damp heat test chamber, alternating damp heat test chamber, high temperature and high humid test chamber, benchtop humidity chamber, etc.

 

  • Shell protection grade test chamber

IP42, IP44, P54, IP55, IP65, IP66, IP67, IP68 protection level certification, and testing chamber services;

 

  • Three-proof test chamber

Salt spray corrosion tester (neutral salt spray tester, alternating salt spray tester, acid salt spray tester), damp heat tester (constant damp heat, alternating damp heat), etc ;

 

  • Special tester

Simulated high altitude test chamber, solar radiation test chamber, rain spray test environmental chamber, sand and dust test chamber, benchtop environmental chamber, walk-in environmental chambers, etc.

 

  1. Mechanical environment testing chambers

Applicable standards are GB2423, GJB150A, GJB4, IEC60068, GJB1032, GJB322A, GJB360A, GJB548, TB3058, GJB899, GB / T21563, ISO16750, etc.

 

  • Vibration tester

Sine vibration tester (sweep frequency endurance tester), random vibration tester, broadband random vibration tester, narrow-band random vibration tester, etc.

 

  • Shock tester

Thermal shock chamber, the semi-sine wave mechanical shock tester, after peak sawtooth wave shock tester, shock response spectrum tester, temperature shock chamber, etc.

 

  • Other test chambers

Drop tester (free fall, repeated drop), collision tester, acceleration tester, thermal cycling chambers, walk-in test chambers, etc.

 

  1. Comprehensive environmental reliability testing chamber

The applicable standards are GB2423, GJB150A, GJB899, etc.

Temperature and humidity combined testing chamber, temperature, and humidity and vibration comprehensive test chamber (three comprehensive test chamber), etc.

 

 

 

2 thoughts on “Do you know what types of environmental testing chambers are?

  1. Armanda Holbrooks says:

    Thank you, I’ve recently been searching for information approximately this topic for a long time and yours is the best I’ve found out so far.

Leave a Reply

Your email address will not be published. Required fields are marked *