Traction Battery Drop Tester

Traction Battery Drop Tester

Traction Battery Drop Tester simulates the battery from a height of 1m ~ 1.5m, falling to the concrete floor (or 30mm thick hardwood), each battery to any direction (face, corner, edge) free fall 3 times, the battery should not catch fire, not explode.

Send Inquiry Chat Now

Description

Traction Battery Drop Tester Relevant standards requirements

Single Storage Cell Safety Test

Drop testing steps

Charge the single storage cell according to 6.1.3
Drop the positive-negative terminals of the cell from the height of 1.5m to the concrete floor；
Observe for 1h

Battery Module Safety Test

Charge the battery module according to the standard 6.1.4
Drop the positive-negative terminals of the battery from the height of 1.2m to the concrete floor
Observe for 1h

Traction Battery Drop Tester Standard

UL 2580

Technical Parameters

Model	BF-F-315ST
Drop Height	300~1500mm (Adjustable)
Display Mode	Digital display, adjustable
Max. Load	0~70KG (can be customized 100KG, 200KG, etc.)
Testing Method	Face, edge, corner dropping
Control Method	Machine & Controller remote control independent
Drop & Lifting Method	Electric
Specimen Max. Size	W800 X D600 X H800mm (Customized available)
Overall Dimension	W1200 X D1700 X H2400mm
Drop Floor Material	Standard Steel Plate (Optional: Cement plate, marble plate, wood plate)
Power Source	AC 380V 50HZ 0.75KW
Machine Weight	Approx 750KG
Safety Alarm Device	Electric leakage, over-temperature, over-voltage, overloading, over-current protection, abnormal sound light alarm, smoke alarm, etc.
Safety Protection	Explosion-proof fence surrounded

Chinese (Traditional)