Sea Water Immersion Test Device

Relevant standards requirement:

Test Object: Battery storage pack or system.
The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two methods to operate test at the room temperature.

Immerse the test objects (in the direction of real vehicle assembling) into 3.5% NaCl solution (mass fraction, simulated under normal temperature water composition) for 2 hours. The water depth is to be sufficient to completely submerge the test objects.
Test objects according to GB/T4208-2017 part 14.2.7 test method and test process.

Product Name	Sea Water Immersion Test Device
Model	BE-HS-10000L
Water Tank Internal Dimension	W3500 X D2500 X H1200mm (can be customized)
Space Occupation	W6000 X D5000 X H5000mm
Single Crane	Cantilever Lifting, Rotatable, Multi-dimensional Lifting
Travelling Crane	Traveling crane can move up/down and move forward/backward. It is easy to install the test object.
Lifting belt	For immobilizing the test object when lifting
Water Tank Material	PP plate(Insulation and corrosion resistance) Or directly digging a pool on the ground, concrete casting structure, and paste bright colored tiles.
Max Load	1000KG (can be customized)
Equipment Weight	Approx 3.5 Tons
Power Supply	AC 380V, 7.0KW
Other requirements	Automatic filling and draining water system.*Brine mixing system. On-line monitoring of brine concentration, manual addition of salt, automatic detection of concentration. PLC touch screen control + Computer remote control system. The video monitoring system, Lighting system.